Product Information

Quickseam Corner Flashing 216mm Diameter Available either individually or Box of 20 Description Quickseam Corner Flashing is a 216 mm in diameter round piece of uncured EPDM factory laminated to QuickSeam Tape. It is designed to flash outside corners or to be used as a cover patch for repairs where appropriate. Preparation EPDM surfaces and/or mating surfaces must be prepared with QuickPrime Plus, using a QuickScrubber tool. Use of other products is not allowed. Restore the product to room temperature prior to use if exposed to temperatures below 15ºC for prolonged periods. Application On cold days with ambient temperature below 5ºC, the use of a heat gun is recommended to warm the Quickseam Corner Flashing and to ensure good

Quickseam SA Flashing SA Flashing is a 457mm wide RubberCover membrane fully laminated to Quickseam tape. It has a polyester release liner for easy removal and excellent weather resistance.SA Flashing can be used to line gutters, carry out general roof repairs where cured EPDM is required, sklights, parapets, flash in drain insert pieces and pipe flanges. SA Flashing is a labour saving and environmentally friendly alternative to conventional methods which use contact adhesive for attachment. SA Flashing can be used for curbs or parapets where flashing heights allow. Due to the fact that the Quickseam Tape Technology is used as the adhesive it is considered self-seaming. Simply prime the membrane with Quickprime Plus to which the SA Flashing will

Quickseam Pipe Flashing Quickseam pipe flashings are specifically designed to be used in roofing applications for flashing of round penetrations. Quickseam Pipe Flashings will fit various penetrations and must be cut to correct pipe diameter before installation. This flashing can be used on pipes up to 6 inches wide Quickseam Pipe Flashings may be used to flash penetrations for both EPDM as well as APP and SBS Modified Bitumen systems. Method Of Application Penetration must be clean of prior flashing and foreign materials. Cut along the top edge of the ring on the Quickseam Pipe Flashing corresponding to the size of the pipe. Install the Pipe Flashing, clamping ring and lap sealant. Product code: 333805 Buy Now

Elevate Spray Adhesive New BA-2012 Spray Bonding Adhesive for EPDM roofing membranes Elevate Building Products is pleased to introduce its new sprayable Bonding Adhesive BA-2012 S. This new contact adhesive is formulated for spray application only. Its solvents, viscosity and high solid content result in improved coverage rates, easy and quick installation and reduced drying times. 3m2 per Litre. The Bonding Adhesive BA-2012 S is available in 17 litre pressurized canisters and 750 ml aerosols. A spraying kit has been designed for use with the canister in combination with a cleaner for maintenance. Product code: FSSPRAYAD750 Buy Now

PermaRoof UK UPVC Edge Trim 3.5m Lengths Black White Anthracite Grey We are the manufactures of the PermaRoof UK Trim and we guarantee to beat any price on the internet. Free Installation guides available on request via e-mail or post Features and benefits Designed with its own water-check kerb to be used around the perimeter of a flat roof to direct water towards the gutter edge. Extruded using virgin plastic ensuring colour fast, non brittle, identical profiles. Manufactured BSI Quality assured to 99.9% accuracy. PermaRoof UK Bond & Seal or PermaRoof UK Closed Cell Foam Tape must be used to form a seal between the Trim and the EPDM. Polypins are used to fix the trim into the Fascia

PermaRoof UK Trim Clip UPVC Joint PermaRoof UK Joint Clip Available in Black or White 40mm Width This clip is used for joining two pieces of PermaRoof UK Edge Trim together. It is moulded to the same shape as the Edge Trim and requires no fixings. Product code: QTJOINT Buy Now

PermaRoof UK Plus Trim - Internal Corner 90 Degree Internal corner This is an Injection moulded corner piece available in Black or White, used on a 90 degree Internal bend. It can be installed using PermaRoof UK Bond & Seal or with Polypins, either way it provides a very neat, professional touch. See the download section for Installation details. Product code: PPINTCORNER Buy Now

Polytop Nails Stainless steel pins with plastic heads. Used for securing the PermaRoof UK edge trim to the fascia board Available in Black, White or Anthracite Grey Available sizes 50mm or 40mm Box size 100 Product code: PN Buy 40mm PolyTop Nails Buy 50mm PolyTop Nails PermaRoof UK is the UK’s largest provider of Firestone EPDM RubberCover membranes and products, providing a long-term solution to leaking flat roofs. The EPDM flat roofing membranes are manufactured from a synthetic rubber compound and have been used on commercial and industrial roofing worldwide for more than 25 years. Today, the high-performance, proven system is available for waterproofing residential flat roofing and is fast growing in popularity as it

QuickPrime Plus Primer Description Quickprime Plus is designed to clean and prime the EPDM membrane prior to application of Quickseam products. Quickprime Plus must be applied with a Quickscrubber Pad and Handle. Preparation Surfaces to be primed must be clean, dry and free of foreign materials, talc and dirt. Pre-cleaning with Splice Wash may be required. Stir Quickprime Plus thoroughly before and during use. When exposed to lower temperatures for a prolonged period of time, restore to room temperature prior to use. Pour the required amount of Quickprime Plus into a bucket for ease of application. Application Apply Quickprime Plus to the EPDM membrane with a Quickscrubber Pad and Handle, using long back and forth strokes with moderate to

QuickScrubber Kit - Pads and Handle DESCRIPTION: QuickScrubber Kit consists of a scrub pad and holder that allows application of QuickPrime. The QuickScrubber pad is secured to the bottom of the holder. The bottom-bearing surface of the QuickScrubber holder is flat. When proper pressure is applied, the handle flattens out assuring that proper pressure is maintained. METHOD OF APPLICATION: Install a QuickScrubber pad on the bottom of the handle by pressing the pad onto the industrial grade Velcro surface with firm hand pressure. Use back and forth strokes with heavy pressure along the length of the splicing area, until membrane surfaces become dark gray in color with no streaking or puddling. Bear down on the QuickScrubber pad during application