Project Description

Firestone QuickPrime Plus Primer

Firestone Quickprime Plus is designed to clean and prime the EPDM membrane prior to application of Quickseam products. Quickprime Plus must be applied with a Quickscrubber Pad and Handle.


Surfaces to be primed must be clean, dry and free of foreign materials, talc and dirt. Pre-cleaning with Splice Wash may be required. Stir Quickprime Plus thoroughly before and during use. When exposed to lower temperatures for a prolonged period of time, restore to room temperature prior to use. Pour the required amount of Quickprime Plus into a bucket for ease of application.


Apply Quickprime Plus to the EPDM membrane with a Quickscrubber Pad and Handle, using long back and forth strokes with moderate to heavy pressure along the length of the area. Continue until surfaces become dark grey in colour (no streaking or puddling). Factory seams require parallel as well as perpendicular application motions along the factory seam. Allow the primed surfaces to dry completely according to the touch-push test (usually less than 10 minutes) before applying Quickseam products (3″ seam tape, 6″ batten cover strip, 9″ formflash etc)


Thinning is not allowed. The following coverage rates can be achieved Per Litre of Quickprime Plus,

  • Standard seam with 3″ seam tape = 15lm – 2 sides
  • “>6” batten cover strip = 8lm – 1 side
  • “>5” Flashing Tape = 10lm – 1 side
  • 9″ Formflash = 4lm – 1 side
  • RPF Strip = 15lm – 1 side
  • RMA Strip = 15lm – 1 side


Flammable, keep away from sources of ignition. Do not smoke when using. For professional use only. Use only in well ventilated areas. Avoid contact with skin and eyes. Keep out of reach of children.


Store in original containers at temperatures between 15 – 25 degrees. Keep the material out of direct sunlight until ready for application.

Shelf life – 12 months, when stored in above mentioned conditions, shelf life will be reduced if exposed to higher temperatures.

Product code: QPRIME

Buy Now

Permaroof UK Ltd is the UK’s largest provider of Firestone EPDM RubberCover membranes and products, providing a long-term solution to leaking flat roofs. The EPDM flat roofing membranes are manufactured from a synthetic rubber compound and have been used on commercial and industrial roofing worldwide for more than 25 years. Today, the high-performance, proven system is available for waterproofing residential flat roofing and is fast growing in popularity as it consistently outperforms traditional felt roofing.

The unique compound of EPDM membranes brings flexibility and durability to flat roofing products with a low life-cycle cost as it requires little or no maintenance over its expected lifespan of 50 years plus! The EPDM flat roofing revolution is upon us! Buy the featured products online at

We can arrange, through a list of trained and approved installers, for you to receive a no obligation quotation for your flat roofing project, with all work fully guaranteed for your peace of mind.

Permaroof also offer Permaroof-in-a-box®, containing everything you need to undertake the fitting of a flat roofing project. We think of everything at Permaroof and strive to meet the needs of all our customers. Whether you require a supplier for your flat roofing business, or are replacing a shed roof or installing a new garage roof, we can help you. Watch our video demonstrations on this channel and see this innovative flat roofing system for yourself – high-performance, high-quality and superior weatherability, Firestone EPDM flat roofing systems are the future of waterproofing for a flat roof.