The RubberCover Bonding Adhesive and QuickPrime Plus primer can only be used in well-ventilated areas. Both products must be kept away from ignition sources. Do not smoke when using. Elevate recommends wearing gloves when applying the QuickPrime Plus primer. For further information, please consult the Safety Data Sheets and/or the information shown on the product labels.
Compatible substrates are wood, Elevate ISOGARD HD cover boards, PIR and PUR insulation boards, bitumen, concrete, masonry, aluminium, zinc and lead. RubberCover EPDM can overlay virtually any old roof, provided the roof decking is sound and the existing structure can carry the load of the new roofing system.
No, the membrane is only available in black.
The membrane can be easily repaired with a piece of Elevate's QuickSeam SA Flashing.
Sedum vegetation can be placed over the RubberCover EPDM membrane, provided that a root-resistant geotextile is used between the vegetation and the membrane. A distance of 30 cm must be taken into account between the vegetation and every roof installation detail.
Well, there are a few benefits. It is cold applied, reducing your public liability insurance. Its a really quick install time, great when there are restricted weather gaps Strong global branding 50 Years life expectancy Large seamless sheets, up to 12m x 30.5m We also have some rolls upto 61m long. In 1 Piece.
Yes. The minimum temperature required for the application of the RubberCover Bonding Adhesive is + 5°C and the maximum humidity is 80 %.
No, except when the membrane is extremely dirty, in which case it must be cleaned with water and a clean rag.
The coverage rate is 1 liter per 2 m² (two-sided).
No. the RubberCover Bonding Adhesive must always be applied two-sided, i.e. both to the underside of the membrane as well as to the substrate.